Calculate the volume of the cabinet:
Take the complete measurements of the cabinet, height, width and depth. For example : Height 1,20m X width 0,80m X depth 0,45m or: 0,432 m3.
Estimate the number of meters of tube needed for proper detection: The tube should pass over all rows of circuit breakers and near the contactors. You must add 0.20 m at each change of direction to avoid “pinching” the tube.
Do not hesitate to send us a front picture of your open cabinets, specifying on which side you want to fix the Reflexofeu cylinder ? Check the air inlets and specify any natural or mechanical ventilation. You can tell us in case of doubt the dimensions of these vents.
Vous souhaitez fixer le réservoir du Reflexofeu ? Vérifier les entrées d’air et précisez les éventuelles ventilations naturelles ou mécaniques. Vous pouvez nous préciser en cas de doute les dimensions de ces aérations.
The ReflexOfeu cylinder must be mounted vertically on the cabinet or on the wall.
Provide sufficient space on the side of the cabinet taking into consideration the following dimensions.
| External dimensions | Diameter | Height |
|---|---|---|
| 1kg with wall bracket | 11 cm | 33 cm |
| 2kg with wall bracket | 12 cm | 36 cm |
| 3kg with wall bracket | 15 cm | 40 cm |
What you have in the kit
- Low pressure tank with internal liner and external epoxy pain, CE-certified
- Epoxy painted metal wall bracket
- 3 entry direct head with integrated manometer
- Detection and extinguishing tube with fast shutter, resistant to an ambient temperature of 145 ° C length 10m, 15m or 20m depending on the kit,
- IP68 cable glands
- Adhesive or screw fasteners for diameter 6 tubes (between 3 to 4 fasteners per meter)
- Schrader Nitrogen Filling Valve Tip
- Extinguishing agent REFLEX 1230
- Normally closed pressure switch
- Nitrogen N2 pressurization gas